CACIM

Category:

CACIM

Overview:

Main components:PLA
Application field:Biodegradable knife, fork, spoon, biodegradable toy, etc
Storage and packaging:This product is a fully biodegradable plastic particle, which should be placed in a dry, ventilated place and kept away from light. It should be used as soon as possible after unpacking. For particles that are not used completely in time after unpacking, they shall be dried at 80 ℃ for 4h in the next use.

Messages

Main components:

PLA

Performance introduction:

CACIM01 is an injection molding grade biodegradable resin with two sub brands: CACIM01FG (food grade) and CACIM01UFG (non food grade). The particles are milky white, easy to absorb moisture, and have no peculiar smell. During injection molding, the resin has good fluidity, fast crystallization speed and certain toughness. It does not contain Pb, Cd, Hg, Cr, PBB, PBDE and other harmful elements, nor toxic substances such as o-benzene plasticizer and bisphenol A. Among them, the food safety performance of CACIM01FG meets the relevant requirements of GB4806, and the biodegradability of the two sub grades of resins meets the requirements of international authoritative standards such as EN13432 and ASTMD6400.

Mechanical properties (after annealing)	Test standards	Company	Test result
Tensile strength	ISO 527	MPa	≥45
Elongation at break	ISO 527	%	≥7
Thermal properties (after complete annealing)	Test standards	Company	Test result
Thermal deformation temperature	ASTM D648-2007	°C	≥100
other	Test standards	Company	Test result
Melt index	ISO 1133	g/10min (190℃，2.16KG)	20-30
Density	ISO 1183	g/cm³	1.45-1.50
Injection molding conditions		Company	Recommended value
Temperature at the rear of the barrel		℃	130-150
Temperature in the middle of the barrel		℃	180-190
Temperature in front of barrel		℃	180-190
Nozzle temperature		℃	180-190
Mold temperature		℃	90-110
Mold holding time		S	20-30

Application field:

Biodegradable knife, fork, spoon, biodegradable toy, etc

Storage and packaging:

This product is a biodegradable plastic particle, which should be placed in a dry, ventilated place and kept away from light. It should be used as soon as possible after unpacking. For particles that are not used completely in time after unpacking, they shall be dried at 80 ℃ for 4h in the next use.

key word: Biodegradable modified resin | Biodegradable membrane bags

Address: Qingda Industrial Park, Chengyang District, Qingdao, Shandong

CACIM

About Us

Biodegradable modified resin

Biodegradable membrane bags

CAC BIOMATERIAL